Have you ever entertained the
thought ‘I could do that myself.’
The question is DIY roofing is a
good idea.
I have been a plumber for over 20
years and have seen a lot of construction work, notice how the builders do things,
how to connect the electricians and the operation of other traders. I have
often said ‘I can do that’ and ended up having to get a qualified dealer to
alter or terminate the work (plumbing not) I’ve started.
I tried wiring in my ship again, in
the middle of the process decided to call the electrician just said I had to
get everything he had done and start over. Now I realize that there is a reason
they are skilled tradesmen, like me, and although I know that many, I should
let them work and stick to what I’m trained in.
So what is so hard to buildings?
I guess it’s not that difficult,
just that it is hard to make things right and with the regulations. You see, it
all comes down to the rules.
Why.
Say you had a storm one day and had
a water leak in the house and cause water damage. You could call the insurance
company, then send an assessor who checks what is damaged and why. If any
questionable areas are asked to set it up.
Now, at this point, if you had a
professional do the work and there were no problems found with the work then
either they or their insurance deals with it, but if you discover an
unqualified person work installed, then you have no guarantee that your
insurance will cover the problems.
You could say ‘if I installed it,
there would be no problem. “Let me take you through a lot of points at which
the regulations and guidelines of the manufacturer to demonstrate that there
are many other areas to consider than you might think.
Are there any tips of the limiting
factors on what you can do – heritage overlays, land agreements, council
bylaws, BAL considerations, etc?
Specific rules of creation – is building insurance necessary, the roof structure meets
current regulations?
The meteorological data needed to
determine the size of gutters and downspouts sizes and locations in reference
to the size of the roof, and how to set overflow protection?
Do battens cover compliance and the
distance between the slats, so the roof profile is needed due to the
limitations of slope?
The outgoing sewer is required and
why, how much cover flashing is required and why?
Roof penetrations. What kind of intermittent to use and how to allow for
expansion and contraction?
Are there power cables in the wrong
places exposed to mechanical damage or where someone can screw in?
Fall protection – this is now a very big problem and needs a lot of
consideration, even in your own home, and new laws SST maintain responsible
homeowner where no contractor involved.
The wind and weather considerations
when installing the ceiling and safety involved. There are even more areas to
cover when looking at the installation of a roof in a professional manner, but
the biggest reason for the use of skilled tradesmen know that your work is done
is covered by a 6-year guarantee, giving you peace of mind ..
At the end of the day, your roof is
one of the first things you see and is the crown jewel of your home, so you
want someone who takes pride in doing the best job they can.
You see, it is just a matter of
removing the old blade and install the new change, regulations; requirements
change advice, change building regulations and much more. You could get through
the work and that your neighbor is complaining about something and if there is
a problem I have not covered then you’re in fines and even have to change the
job.
Then you have the problem of the
sale of the house, if you do not have the relevant certificates and / or
insurance, then do not get through specific legal requirements that are in
place now.
Today there are so many pitfalls and
areas of potential litigation is not only worth trying to save money by doing
it yourself. If you are ever in doubt of what you can do you cannot contact
your local council and it will give the address.
As the manager of fresh water
plumbing I have the pleasure of working with you the homeowner, working through
their wants and needs and delivering a finished product that shows quality
workmanship.
You the customer are the most
important part of any work and the finished product is not only a work of art
for you, is also a display piece showing our skills and dedication to quality.

Find out about how to install torch down roofing and what costs are involved. Also, learn about the main benefits, cautions, tools and material you absolutely need.
ReplyDeleteIko shingles